Just as you would prepare and prime yourself for a big work meeting, preparing to coat your timber is just the same.
Feast Watson Timber Primer is the perfect first step to preparing your timber for stain and varnish.
Timber Primer is a wood preserver with added water repellency and inhibits mould growth, making it the perfect choice for your exterior timber or interior damp areas (such as bathrooms).
Preparation is key for all DIY projects.
Note: Timber Primer should NOT be used under penetrating coatings such as Feast Watson Woodshield Oil, Decking Oil or Decking Stain.
How to prepare my timber for Feast Watson Timber Primer:
A few easy steps:
New Timber How to prepare New Timber:
Sand timber and remove all sanding dust before coating.
Previously Coated Timber How to prepare Previously Coated Timber:
Previously coated surfaces needs to be sanded to bare timber.
Remember to remove all sanding dust before coating!
How to apply Feast Watson Timber Primer:
It's easy! Just follow these steps:
Ensure your product has been thoroughly stirred before and during application with a flat blade stirrer.
Using a brush, roller or spray, apply your first coat. Ensure edges and end grain are fully coated. - A second coat may be necessary for porous timbers. Additional coats can be applied wet-on-wet.
Leave to dry for 12 hours before overcoating with desired finish.
Ensure your product has been thoroughly stirred before and during application with a flat blade stirrer.
Using a brush, roller or spray, apply your first coat. Ensure edges and end grain are fully coated. - A second coat may be necessary for porous timbers. Additional coats can be applied wet-on-wet.
Leave to dry for 12 hours before overcoating with desired finish.
This website uses cookies to provide you with a better user experience. If you agree to our use of cookies, please accept this message and continue to use this site.
